Enjene ea makenete e sa feleng e habeli e kopantsoeng letoto la khatello ea mekhahlelo e 'meli
Kakaretso
Li-compressor tsa khatello ea moea tse kopaneng tsa OSG ETZV Series Dual Permanent Magnet tse Kopantsoeng tsa Mehato e 'Meli li emela tsoelo-pele theknolojing ea khatello ea moea. Ho fapana le meralo e tloaelehileng e itšetlehileng ka li-gear kapa li-coupling pakeng tsa mekhahlelo, letoto la ETZV le na le li-motor tse peli tse ikemetseng tsa makenete tse sa feleng, lipheletso tse peli tsa moea, le li-inverter tse peli tse inehetseng - kaofela li kopantsoe yuniti e le 'ngoe, e kopaneng. Moralo ona o ikhethang o fana ka katleho ea phetisetso ea 100%, o felisa lintlha tse tloaelehileng tsa ho hloleha (li-gear, li-coupling, le li-bearing tsa enjene), 'me o fihlella poloko e kholo ea matla ka taolo ea 'nete ea lebelo e se nang mehato. E fumaneha ho tloha ho 37kW ho isa ho 200kW, letoto la ETZV ke khetho e ntle bakeng sa liindasteri tse batlang katleho e phahameng, ts'epo le ts'ebetso e khutsitseng.
Melemo ea Bohlokoa
1. E Tsitsitseng Haholoanyane – Lintlha Tse Fokolang Tsa ho Hlōleha
| Karolo e Felisitsoeng | Bothata ba Setso | Tharollo ea ETZV |
|---|---|---|
| Li-gear | Ho tsofala, ho robeha, le ho tlotsa hoa hlokahala | Ha ho li-gear - li felisitsoe |
| Likopano | Ho se tsamaisane hantle, ho petsoha, ho thothomela | Ha ho li-coupling - li felisitsoe |
| Li-Bearing tsa Motlakase | Mokhathala, ho hloleha, lerata | Sekoti se kopaneng - se felisitsoe |
Sephetho: Tšepo e phahameng haholo le bophelo bo bolelele ba tšebeletso.
2. Taolo ea Lebelo le sa Senyeheng ka Mehato - E Sebelisang Matla Haholoanyane
| Tšobotsi | Melemo |
|---|---|
| Li-motor tse peli tsa PM + li-inverter tse peli | Taolo ea lebelo e ikemetseng bakeng sa mohato ka mong |
| Phapang ea lebelo le se nang mehato | E tsamaisana hantle le tlhoko ea moea - ha ho na litšila |
| Bokgoni ba phetisetso ea 100% | Ha ho tahlehelo ea lisebelisoa, ha ho tahlehelo ea ho kopanya |
| Khatello e ka fetoloang pakeng tsa mekhahlelo | Ntlafatsa karolelano ea khatello bakeng sa katleho e kholo |
| Kamehla e sebetsa ka lebelo le phahameng ka ho fetisisa la ho boloka matla | E fokotsa tšebeliso e itseng ea matla |
Poloko ea matla khahlanong le mohato o le mong: 20%~30%
3. E Sebetsang Haholoanyane – IE3 Premium Motors
- Li-motor tsa makenete tse sa feleng tse sebetsang hantle haholo: Tekanyetso ea IE3
- Bokgoni ba phetisetso ya 100%: Sebopeho se kopaneng sa shaft – drive e otlolohileng
- Lipheletso tse peli tsa moea + li-motor tse peli + li-inverter tse peli: Mokhahlelo ka mong o sebetsa ka lebelo le phahameng ka ho fetisisa
4. E phutholohile haholoanyane - Ts'ebetso ea Lerata le Tlase
| Mohloli oa Lerata | Setso | Letoto la ETZV |
|---|---|---|
| Letlooeng la lisebelisoa | ✓ | ✗ E felisitsoe |
| Phetiso ea ho kopanya | ✓ | ✗ E felisitsoe |
| Li-bearing tsa enjene | ✓ | ✗ E felisitsoe |
Sephetho: Tikoloho e khutsitseng le e phutholohileng haholoanyane ea ho sebetsa.
5. Moralo o Monyenyane Haholo – o Bolokang Sebaka
- Sebopeho se kopaneng - mekhahlelo e 'meli ka har'a sephutheloana se le seng se senyenyane
- Ho kenella ha moea ka thoko - ho fokotsa mojaro o pholileng
- Phanele ea ho kenya e ikemetseng - molaoli oa PLC oa maqhubu a mabeli
- Sekoahelo sa lerōle se ka tlosoang - ho hloekisa habonolo
- Setlamo sa phaephe se tsitsitseng sa ho ntša mosi – se thibela ho thothomela ha khase
Litlhaloso tsa Tekheniki (Letoto la ETZV)
| Paramethara | ETZV-37A | ETZV-45A | ETZV-55A | ETZV-75A | ETZV-90A | ETZV-110A | ETZV-132A | ETZV-160A | ETZV-200A |
|---|---|---|---|---|---|---|---|---|---|
| Matla (kW/HP) | 37/50 | 45/60 | 55/75 | 75/100 | 90/120 | 110/150 | 132/175 | 160/215 | 200/270 |
| Phallo ea Moea / Khatello (m³/min/MPa) | |||||||||
| 0.6 MPa | 7.91 | 10.5 | 13.55 | 16.19 | 22.68 | 24.92 | 30.65 | 37.2 | 43.89 |
| 0.7 MPa | 8.25 | 10.2 | 13.1 | 16.11 | 21.02 | 25.29 | 29.28 | 35.25 | 41.59 |
| 0.8 MPa | 7.67 | 10.02 | 12.31 | 15.35 | 19.81 | 24.01 | 27.61 | 33.82 | 40.03 |
| 1.0 MPa | 6.55 | 9.24 | 11.15 | 13.47 | 18.08 | 20.31 | 24.53 | 30.59 | 34.47 |
| Litekanyo (L×W×H mm) | 2200×1400×1355 | 2200×1400×1355 | 2400×1400×1600 | 2400×1400×1600 | 2120×1600×1680 | 2120×1600×1680 | 2900×1800×1900 | 2900×1800×1900 | 3200×2000×2100 |
| Boima (kg) | 1800 | 1900 | 2350 | 2650 | 3100 | 3380 | 3600 | 3750 | 4150 |
| Boholo ba Thepa ea ho Rekisa | RP1-1/4" | RP2" | RP2" | RP2" | DN65 | DN65 | DN80 | DN80 | DN100 |
Litlhaloso tse Akaretsang:
- Motlakase: 380V / 3PH / 50Hz (e ka fetoloang)
- Mokhoa oa ho khanna: Shaft e kopantsoeng - 100% drive e otlolohileng
- Mokhoa oa ho qala: VSD start (li-inverter tse peli)
- Sekhahla sa oli: ≤ 3 PPM
- Ho Pholisa: Ho Pholisitsoe ke moea (A)
Likopo
| Indasteri | Kopo |
|---|---|
| Merafo le Tšepe | Ho kenya moea, ho tsamaisa thepa, ho cheka ka pneumatic |
| Ts'ebetso ea Lik'hemik'hale | Mocheso oa moea, lisebelisoa, ts'ebetso ea valve |
| Tlhahiso ea Likoloi | Mehala ea kopano, li-spray booths, liroboto |
| Lisebelisoa tsa Elektroniki le Li-semiconductor | Moea o hloekileng, o nang le khatello e sa khaotseng bakeng sa tlhahiso e nepahetseng |
| Lijo le Lijo tse Nooang | Ho sebetsana, ho paka, ho hloekisa |
| Meriana | Ho belisa, ho omisa, moea oa laboratori |
| Lesela | Lisebelisoa tsa ho loha, ho daea le ho etsa dae tsa moea-jet |
| Matla le Matla | Moea oa limela, litsamaiso tsa taolo |
Netefaletso ea boleng
- Tlaleho ea Teko ea Mechini: E fanoe
- Tlhahlobo ea Video e Tsoang: E fanoe
- Tiisetso: Selemo se le seng
- Boemo: 100% E Ncha
Lipotso Tse Botsoang Khafetsa
P1: Ke eng e etsang hore ETZV e fapane le ea setso ea mekhahlelo e 'meli?
Li-motor tse peli tse ikemetseng tsa PM, li-inverter tse peli, le moralo oa shaft o kopantsoeng - ha ho na li-gear, ha ho li-coupling, ha ho na li-bearing tsa enjene. Bokhoni ba phetisetso ea 100%.
P2: Nka boloka matla a makae?
20–30% ha e bapiswa le di-compressor tsa mohato o le mong.
P3: Bokgoni ba phetiso ke bofe?
100% – shaft e kopantsoeng e se nang likarolo tsa mechini tse mahareng.
P4: Na ho lerata?
Tjhe. Dikere, di-coupling, le di-bearing tsa di-engine - tsohle di fedisitswe - di fokotsa lerata haholo.
P5: Ke phepelo efe ea motlakase e hlokahalang?
Maemo a Tloaelehileng: 380V/3PH/50Hz. Li-voltage tse ling lia fumaneha ha ho kopuoa.
P6: Ke bokae ba oli e teng moeeng o ntšang metsi?
≤ 3 PPM.
P7: Molemo oa li-inverter tse peli ke ofe?
Mokhahlelo ka mong o na le taolo e ikemetseng ea lebelo, e lumellang phetoho e nepahetseng ea khatello lipakeng tsa mekhahlelo bakeng sa katleho e phahameng ka ho fetisisa.
P8: Moralo o ntlafatsa ts'epo joang?
Ha li-gear, li-coupling le li-bearing tsa enjene li tlosoa, lintlha tsa ho hloleha li fokotseha haholo.
Lihlahisoa tse amanang
-
110Kw/150Hp Mochini o Habeli oa ho Rotary Screw Air Compress ...
Melemo ea Bohlokoa Melemo ea ho boloka eneji: Enjene ea makenete ea kamehla e boloka bokhoni bo phahameng ka lebelo le tlase, e fana ka melemo e totobetseng ea ho boloka eneji tlas'a maemo a tlase a moea. Mefuta ea maqhubu e akaretsa 0%-100% (ha ho bapisoa le 60%-100% bakeng sa li-compressor tsa maqhubu a tloaelehileng a feto-fetohang). E boloka matla a 22%-40% ha ho bapisoa le li-compressor tsa lebelo le tsitsitseng. E boloka matla a 5%-15% ha ho bapisoa le li-compressor tsa inverter tse tloaelehileng. Liphetoho tse kholo tsa bophahamo ba sistimi li fella ka ho hlaka haholoanyane ...
-
Lerata le Tlaase la Indasteri Bokgoni bo Phahameng ba 10HP 15HP ...
Selelekela Re sebelisa li-algorithms tse ikhethileng ho fetola lebelo la compressor ho latela litlhoko tsa mojaro tse fetohang tsa fektheri. Sena se fana ka bophahamo ba moea le khatello e nepahetseng e hlokoang ke bareki ba rona, ha re ntse re eketsa poloko ea matla. Ka taolo ea maqhubu a feto-fetohang a mefuta e mengata, taolo ea mefuta e mengata, le ts'ebetso ea ho emisa ka tšohanyetso, re fihlella poloko ea matla ho sa tsotelehe mojaro. Enjene ea makenete ea kamehla e na le moralo oa khetla e habeli e nang le tsela ea oli pakeng tsa ...
-
Konpresser ea moea ea VFD screw 0.7-1.25mpa ea ho Boloka Matla ...
Melemo ea Bohlokoa 1. Compressor e bohlale ea VFD e nang le li-algorithms tse lumellanang le mojaro e boloka matla a 20–35% mme e boloka botsitso ba khatello ea ± 0.01 MPa. 2. Enjene e pholileng habeli e nang le oli e hanela lerōle—e loketse libaka tse thata joalo ka libaka tsa ho theha le limela tsa samente. 3. E na le mefuta e mengata ea 7.5–250kW, ho fihlela ho 1.25 MPa, e nang le li-voltage tse ka fetoloang bakeng sa indasteri ea likoloi, lijo, meriana le masela. Phihlelo ea lilemo tse 4.21, taolo ea mocheso o sa fetoheng oa 81°C, ≤3 PPM oli e kaholimo ho 3, waranti ea likhoeli tse 12, le f...
-
18.5kW 25HP Industrial VFD PM Screw Air Compressor
Kakaretso ea Sehlahisoa: XZV-25A ke compressor ea moea ea maqhubu a feto-fetohang a makenete a mahareng e etselitsoeng mesebetsi e menyenyane ho isa ho e mahareng ea tlhahiso. Ka enjene e matla ea 18.5kW le phallo e phahameng ka ho fetisisa ea 3.0 m³/min ho 0.7MPa, yuniti ena e fana ka moea o tšepahalang, o se nang oli bakeng sa mefuta e mengata ea lits'ebetso tsa pneumatic. Sebaka sa eona se senyenyane (1250×850×1160mm) le boima ba 310kg li lumella ho kenngoa ho tenyetsehang - esita le likamoreng tse thata tsa mochini. Yuniti ena e na le Y-△...
-
Kompresa ea Sekere ea Sekere e Feto-fetohang ea 22kW ea 30HP
Kakaretso ea Sehlahisoa: XZV-30A e emela keketseho ea bokhoni, e nang le enjene ea makenete ea kamehla ea 22kW e fanang ka matla a fihlang ho 3.7 m³/min ho 0.7MPa. Mohlala ona o entsoe bakeng sa libaka tsa tlhahiso tse nang le tšebeliso e itekanetseng ea moea ho isa ho e phahameng, ho kenyeletsoa le mela e mengata ea tlhahiso e sebetsang ka nako e le 'ngoe. Theknoloji e tsoetseng pele ea VFD e netefatsa hore compressor e sebetsa ka thata feela kamoo ho hlokahalang, e fokotsa tšenyo ea matla haholo nakong ea tlhoko e tlase. Palo ea khahlanong le corona...
-
Konpresser ea Moea e Fetohang ea Maqhubu a Drive 15kW En ...
Melemo ea Bohlokoa VFD e bolokang eneji ka li-algorithms tse nepahetseng e fokotsa tšebeliso ea motlakase ka 20–35%, e tsitsisa khatello ho ± 0.01 MPa. Enjene e pholisitsoeng habeli e sa keneleng oli e sa keneleng lerole—e ka tšeptjoang tikolohong ea samente, diminerale le foundry. Sebaka sa 7.5–250kW, ho fihlela ho 1.25MPa, motlakase o ka fetoloang bakeng sa lits'ebetso tsa lefats'e. Boiphihlelo ba lilemo tse 21, mocheso o sa fetoheng oa 81°C, ≤3 PPM oli e ka har'a eona, waranti ea likhoeli tse 12, tšehetso e felletseng ea kantle ho naha. Paramethara ea Tekheniki Phano ea moea ea mahala: 2.5 m³/min @ 0.7MPa | 2.3 @ 0.8MPa | 2...
